Is your trusty Henry Hoover smelling less than fresh? Don’t worry—these six easy solutions will eliminate odors and leave your vacuum smelling clean and ready to go. From natural deodorizers to deep cleaning tricks, this guide helps you keep your Henry in top condition (without that musty funk!).
Over 10 million Henry Hoovers have been sold since the brand launched in the 1980s, and it is one of the most trusted and well-known brands out there.
Despite the brand being so successful, and the products reliable, problems can arise from time to time.
To maintain your Hoover and continually get the best results, you will need to perform routine maintenance on the little machines.
We’ve compiled a list of the best ways to look after your Henry Hoover and eradicate any nasty smells he may emit.
As an Amazon Associate, I earn from qualifying purchases. The links below may be affiliate links. Please read my disclosure policy for more information.
Vacuum cleaners see a lot of use and store all kinds of dirt and grime inside of them. Therefore, it’s not a surprise that they can smell from time to time.
To remove bad smells, empty and replace the dust bag. Additionally, you can wipe out the interior of the tub and use a bag freshener to remove bad smells.
Furthermore, clean the head and pipes regularly to maintain normal function and remove dirt.
6 ways to remove Henry Hoover smells.
- Empty the bag.
The Hoover bag catches and collects dirt, grime, food, and other particles.
The content remains in the bag and can grow mold. So, empty the bag more regularly to keep smells at bay.
Additionally, overloading the vacuum bag will damage the functionality of the machine.
Once the bag is full, the motor will be under strain, and thus the vacuum will lose some of its suction.
You can visually see how full the bag is, so open up Henry or Hetty to see if it needs to be changed or emptied. Alternatively, you can routinely change out the bag every six months,
Head to the link below to re-stock your Henry Hoover bags. Make sure to check that you are buying bags for the right model.:
[amazon box=”B079NKN5TG” template=”vertical”]
- Clean or change the filter.
A clogged or dirty Henry Hoover filter can worsen its suction powers and harbor nasty smells. Try to replace the filter once yearly to keep on top of this.
Buy your new filters here. You will need to reference your model number when purchasing new filters to ensure they are compatible with your model:
[amazon box=”B0B11FJT5P” template=”vertical”]
Additionally, you can clean the filter frequently to keep on top of things. However, you cannot get the filter wet and need to clean it using dry methods.
What you’ll need:
- Another vacuum
Follow these steps to clean your Henry Hoover filter:
- Disassemble the Hoover to gain access to the filter. Make sure the vacuum is not plugged in first.
- Using the other vacuum cleaner, vacuum around the outside and inside of the filter. Suck up as much dirt and dust as possible.
- Place the filter back in the Hoover, and reassemble it.
Alternatively, if you don’t have access to another vacuum, you can try this method:
What you’ll need:
- Face mask.
- A bin.
- A dry brush.
Steps to follow in cleaning the Henry Hoover filter without another vacuum:
- Wear a mask, and then disassemble the vacuum to gain access to the filter.
- Remove the filter and tap off loose debris into a bin.
- Using a dry, soft bristles brush, brush the surface and interior of the filter. Try to scrape off as much dirt and dust as possible gently.
- Tap the filter in the bin again to remove the loose dust.
- Re-assemble the vacuum, placing a new dust collection bag inside.
- Clean the tub.
When you open up the Hoover, there is the filter, the bag, and the tub’s interior. Remove the bag and filter so you can inspect the tub.
Dust and dirt will fall to the bottom and collect in the tub over time.
Grab a clean, wet cloth and wipe out the inside of the tub. For extra freshness, make a mixture of hot water and lemon and use this to wipe out the inside of the tub.
Then, with a dry cloth, wipe out the excess moisture. Leave the vacuum to fully air dry before placing the bag and filter back on.
- Clean the pipes and tools.
The above methods are the easiest and quickest way to refresh a Henry Hoover; however, the smell may be coming from the pipes.
This is a little trickier to clean as the dirt is not visible.
To clean the hose, follow these steps:
- Disassemble the vacuum cleaner.
- Take apart the pipes, and place them in a bath of hot water with some disinfectant. Make sure you’re only putting water-safe parts in the bath. Do not put the Hoover itself or the vacuum head.
- Leave the pipes to soak for a few hours. Then, if you have access to a long brush, such as a bottle cleaner, use it to scrub the pipe’s interior.
- Then, rinse with fresh water.
- Hang the hose to dry outside, and leave it to fully dry before using it again
- Clean the head.
The vacuum head can get clogged with hair, dirt, and food, which can not only hinder its suction but can cause unpleasant odors.
Detach the hose, and inspect the head. Cut the jammed hairs and remove them.
You can use a toothbrush or something similar to clean out the head as best as you can. This should be done routinely to prevent blockages and clogs.
- Use a bag freshener.
If you’re pretty sure all the parts are clean, and you’re at a loss for what to do, you can use a vacuum bag freshener.
Purchase one compatible with your device and place it inside the dust bag.
Do not put the freshener inside the tub or above the filter, as this can damage the motor.
You can buy Henry Hoover bag freshener on the Henry Hoover website or Hoover up some scented carpet cleaner.
Some extra tips and trips for cleaning Henry Hoovers.
- Put some dry-scented carpet cleaner on the floor and vacuum it up. The carpet cleaner will sit inside the bag and create pleasant scents inside the vacuum. Do not do this too regularly, as it may weaken the hose.
- Change the bag regularly; you can even empty the bag after each time you use the vacuum.
- Clean the filter more regularly. It will drastically improve the suction abilities as well as the smell.
- Wipe the inside of the tub as well as the outside. Vacuum cleaners are often stored under the stairs or in cupboards. As a result, spills and dirt may have gotten onto the exterior of the vacuum, creating smells.
What if Henry Smells like Burning?
The tips and tricks above do not apply to burning smells. If you smell burning, shut off the Hoover immediately. Be careful; the vacuum may now be a fire hazard.
Unplug the vacuum, and move it outside or somewhere out of reach of children and pets.
There may be an electrical issue with the vacuum, and it will need to be serviced by a professional. You will need to hire someone to inspect and fix the vacuum. Do not use the Hoover again until it has been serviced.
To Summarize.
Tending to your cleaning equipment is an annoying addition to your household tasks. But you don’t need to do it regularly.
Servicing your Henry Hoover regularly will improve its functionality and prevent nasty odors.
Try to empty the bag regularly, and change the bag every so often. Additionally, you should clean the filter, as smelly grime may be stuck inside.
You should also clean the head and pipes of the Hoover to remove any trapped dirt.
Finally, you should wipe out the inside of the tub to remove any fallen dirt particles.
With these few steps, you should have your Henry back in perfect working order in no time.
