Maytag Centennial Washer Reset

Maytag Centennial washers are robust machines that usually last between 10 and 12 years. Maytag devices deliver if you’re looking for a long-term, dependable washing machine.

They have been a popular choice since 1892, so they have had plenty of time to design and refine their machines.

Their breadth of experience in home appliances means they know how to build reliable washers and dryers that will last in the home.

They provide a 10-year warranty with all their washers to give you peace of mind when making a significant investment. However, problems arise with the machines from time to time, and you will need to reset or fix them.

We’ve explained the best ways to reset the Maytag Centennial washing machine and some troubleshooting tips.

There may be affiliate links in this article. You can read more about this in my disclosure.

It’s relatively easy to reset your Maytag Centennial washer. You can try resetting it by unplugging it, waiting 30 seconds, and plugging it in again.

If this doesn’t work, unplug the machine. Then, wait 15 seconds and plug the machine in again. Quickly close and open the machine’s lid six times within 15 seconds.

If your machine is still misbehaving, you can troubleshoot the machine. 

How to Reset Maytag Centennial Washer:

Fortunately, restarting the Maytag Centennial Washer is relatively straightforward. If you’ve lost your manual, you may feel lost too.

There are several methods to reset and fix your Maytag Centennial washer, so keep reading.

The first and easiest way to reset the machine is simply to unplug the washer from the electrical outlet.

Leave it unplugged for 15-30 seconds, then plug it back in. This should rest the circuit board and restart the machine. 

If that method doesn’t work for you, some machines require a few more steps. 

Follow these few steps to reset the Maytag Centennial washing machine:

• Unplug the machine from the electrical outlet, and leave the machine for at least 1 minute. 
• You have 30 seconds to begin lifting and closing the lid after plugging the machine back in, so get ready for the next step.
• Plug the machine back in, then lift and lower the lid six times within 15 seconds. 
• Make sure you lift the lid at least 2 inches each time to ensure the magnetic connection on the lid is interrupted, and close the lid fully each time.
• The machine should have been reset, and the washer should be good to use. 

How to Troubleshoot the Maytag Centennial Machine:

If your Maytag Centennial still isn’t behaving as it should, you can try out some of the following methods to troubleshoot it. Troubleshooting the washing machine by running self-diagnostics can help you identify what’s causing the issues.

The tests usually give clues, such as error codes or numbers, indicating the issue. 

How to run diagnostics:

• Ensure the machine is not on or in mode selection. Then, reset the machine using the methods outlined above.
• Turn the dial counterclockwise until the arrow points upwards at the 12 o’clock position. 
• Afterward, turn the dial to the right and wait half a second.
• Then, turn the dial to the right again, and wait another half a second.
• Turn the dial to the left once more, and wait another half a second. 
• Finally, turn the dial to the right. 

Following these steps should allow your machine to enter diagnostics mode, and you will see all the LEDs lights on the controls flashing.

If they aren’t, you will need to repeat the steps. 

Now, turn the dial clockwise once to enter ‘error code mode.’ You can scroll through the modes and select whichever one you think will be most useful. Such as automatic test mode, manual test mode, and others.

We suggest using some of the first four modes, as these are the most helpful. So, turn the dial until it’s back to error code mode, with the dial at the 4 o’clock position. Then, press start. 

What Should Happen?

Once you press start, the actual diagnostics mode will begin. You should be able to see all the lights blinking. If so, you can successfully enter the error code mode.

Next Steps.

If you wish to view the most recent error codes stored in the washer’s memory, follow these steps:

• Turn the dial clockwise until all the saved error codes appear. The Sensing Fill Light will be the only light flashing if there are no more error codes.
• Rotate the dial to the fifth section and try to clear the error codes. 

If the last step doesn’t work, the codes will reappear; if so, follow these steps:

• Press and hold the start button for 5 seconds. This should erase all the error codes and essentially turn the machine off. 
• Doing this means that the machine will shut down, so to re-enter diagnostics mode, you will need to repeat the lengthy dial-turning process we outlined earlier. 

What to do:

Make sure you take note of all the error codes that appear, as they are usually helpful in indicating the issues with the machine.

Cross-reference these codes with the user manual or a document online that will translate and tell you the problem. 

Once you have identified the possible issues with the machine, you can see if they are problems you can fix yourself or if you need to hire a professional.

Refer to the user manual or research online what DIY fixes you can try for the error codes that appeared.

How to Check if Error Codes Have Been Cleared.

Once you have identified and translated the error codes and fixed the problem, you can also check to see if the error codes have been cleared. 

Return to the diagnostics mode using the method provided, and check for issues. You can run the automatic test mode to double-check the washing machine’s functioning and see if anything fails.

Turn the dial until the automatic test mode option appears, and run the test. 

Hopefully, no error codes will appear, and you should have a fixed machine; yay!

Other Common Causes for Maytag Centennial Machine Not Working:

• Check the Drain Hose.

One easy thing you can check is the drain hose. It usually exists the machine out the back, near the bottom. Check for kinked, crushing, and leaks.

If it is a little misshaped, straighten it out to encourage an easy water exit.  If it leaks, you may need to replace the hose or hire a professional. 

• Check the Program.

• If the machine isn’t draining properly, check to see if the last program selected was a gentle, delicate, or slow cycle. These cycles can often leave water in the load and make the machine appear as if it has a draining issue.
  
  Select a high spin speed, short cycle to remove the excess water. 

• Check the drain hose height. 

Washing machines are odd beasts with certain specifications that you may not have predicted could be important. I know that washers have a maximum and minimum drainpipe height requirement- fussy.

Most Maytag washers have a maximum drainpipe height of 96 inches and a minimum of 39 inches from the bottom of the machine. If the drainpipe is positioned incorrectly, the washer will struggle to drain adequately and will probably refuse to run. 

Consult your machine’s guidelines, as each model can differ. So grab a tape measure, and check the height of your drainpipe. 

• Check the mache in level.

If you’ve recently moved the machine or moved house, your machine may not run if it’s not level. So grab a spirit level and check that the machine is level. If it’s not, reposition the machine. 

To Summarize

The best and easiest way to reboot the Maytag Centennial washer is to restart it. You can usually unplug and replug the machine to reset it. Doing this should erase all errors with the machine and control board and reboot the machine.

If this doesn’t work, you can unplug the machine, plug it back in, and do the lid method. If these methods fail, you can enter the machine into diagnostics mode to observe what error codes are presented.

You should then be able to translate these codes to diagnose and fix the problem.

Last update on 2023-06-04 / Affiliate links / Images from Amazon Product Advertising API