Swiffers are handy home gadgets that allow you to mop your floors without mess, fuss, and drying time. The Swiffer WetJet is an all-in-one mopping system that will enable you to spray cleaning solution onto the floor as you push the mop around.
It saves you from saturating massive mop heads and stops you from soaking your floor with lots of gray water for no reason. However, sometimes the Swiffers won’t spray, and the entire process because pointless.
Fortunately, most issues with Swiffer mops can be solved at home; keep reading to find out how.
If a Swiffer WetJet isn’t spraying, but you can hear the motor running, the nozzle is clogged. This is easy to fix with a few simple products.
However, if the Swiffer isn’t spraying and you cannot hear the motor, the motor pump motor may be clogged, rusty, and may need to be lubricated. Fortunately, you don’t need to buy a new Swiffer WetJet; you need to learn the following tips and tricks to get it functioning again.
There may be affiliate links in this article. You can read more about this in my disclosure.
How to Fix a Swiffer WetJet That Isn’t Spraying.
There are a few possible causes for a Swiffer not spraying. You may have already attempted some of the following, but here are some steps to take to fix your Swiffer:
Step 1: Check That The Cleaning Bottle Is Properly Inserted.
First, start by removing the solution bottle and reinserting it. When inserting the bottle, you should be able to hear the bottle click into place.
For the Swiffer to work, the bottle must be situated properly in place; otherwise, it will not spray out the liquid.
Step 2. Check and Replace the Batteries.
The Swiffer motor runs on 4 x AA batteries and will not spray without them. So if it has been a while since you changed the batteries, do so now.
If the Swiffer begins spraying again, then that is great news! It’s a cheap, quick, and easy fix.
However, if you have changed the batteries and still do not hear the motor running, the pump motor may be clogged, rusty and needs to be lubricated. In this case, move on to step 3.
If you have changed the batteries and hear the motor running but no liquid is coming out, move on to step 2.
Step 3. Clean the Nozzle.
If you have put fresh batteries in the Swiffer and can hear the motor running, but nothing is spraying out, the spray nozzles may be clogged.
The quickest and easiest way to do this without disassembling the Swiffer is to do the following:
- Take the Swiffer outside, and stand it upright, leaning against something.
- Using a powerful hose, spray water at the nozzles. A hose with good water pressure will do a better job of unclogging the head.
- Make sure to direct the steam toward the opening of the spray nozzle. Do this for about 30 – 60 seconds.
- If you don’t have a hose, you could instead use a pin or toothpick to unpick the nozzle of the Swiffer. Gently puncture both spray nozzles, and scrape out any grime.
- Fill the Swiffer with water and test the mop; hopefully, it should spray again.
You might want to grab a refill of the Swiffer WetJet pads.
Step 4. Lubricate the Pump Motor.
The pump motor is probably clogged if the motor is silent when you press the spray button, even with fresh batteries. To fix this, the method is a little more complex and will require disassembling the mop.
What you will need:
Follow these steps to disassemble and lubricate the motor:
- Remove the cleaning solution bottle from the device.
- Remove the two screws on either side of the circle where the bottle usually sits.
- Unscrew the larger screw on the outside that holds the mop head to the handle.
- Separate the cover into two halves.
- Using a flathead screwdriver, turn the motor manually through the little window.
- Apply a dry lubricant inside the pump motor and all over the rusted terminal ends.
- Press the spray button- hopefully, the motor should run as it should and make a whirring sound. If so, reassemble the mop.
How to reassemble the Swiffer:
- Put the two pieces of plastic together, and secure them with a large screw.
- Screw the two screws onto either side of the bottle seating area.
- Install the cleaning solution bottle.
Step 5. Check the Battery Compartment.
If all the other steps have left you with a useful mop that doesn’t spray, there may be an issue with the battery compartment. Check to see if the battery connectors are rusty or have debris.
Or, perhaps the old batteries have leaked. Use acetone nail polish remover to remove any battery leakage, and wipe down the area.
Make sure the area is spotless and dry before inserting new batteries.
How to Deep Clean Swiffer WetJet.
It’s important to clean the Swiffer regularly. Cleaning the mop will improve its performance, and prevent the nozzle from clogging.
What you will need:
- A jug or bottle.
- Warm water.
- White vinegar.
- An old toothbrush.
- A toothpick.
- Garden hose.
Follow these steps to deep clean the Swiffer and unclog the nozzle:
- Remove the cleaner bottle from the unit and sit it on a flat surface.
- In a jug, combine a ¼ cup of white vinegar and ¾ cup warm water.
- Dip an old toothbrush into the solution, then scrub the nozzle on the mop.
- Then, insert a toothpick into the nozzle a little to break up any clogging.
- Position the mop over a drain or do this step outside. Pour the remaining cleaning solution into the area where you normally insert the cleaner bottle.
- Squeeze the spray button until the cleaning solution passes through the nozzle.
- Repeat step 6 until you feel the grime has been flushed away.
- Pour out the remaining cleaning liquid, and reinsert the cleaner bottle.
No products found.
Swiffer Still Not Working?
If you have thoroughly investigated the problem, and the Swiffer is still not spraying, you should contact Swiffer. Swiffer offers a money-back- guarantee for its products within 30 days of purchase.
If you are out of the 30-day limit, you can still get them to ask for any advice, refund, or discount on your next purchase.
Swiffers are super handy for household cleaning. They’re so easy to use that they encourage everyone to get involved in the chores.
Some kids even find Swiffer fun; what an absolute treat! However, if the Swiffer no longer squirts out the cleaning liquid, the mop becomes pretty useless.
Fortunately, most problems that cause the Swiffer to stop spraying can be identified and fixed at home for free. Using our troubleshooting guide you should be able to fix most issues with your Swiffer and get it back to its working condition.
Last update on 2023-09-22 / Affiliate links / Images from Amazon Product Advertising API